Spin dynamics in hole-doped two-dimensional S=1/2 Heisenberg antiferromagnets: ^{63}Cu NQR relaxation in La_{2-x}Sr_xCuO_4 for x≤0.04x\leq 0.04

The effects on the correlated Cu^{2+} S = 1/2 spin dynamics in the paramagnetic phase of La_{2-x}Sr_xCuO_4 (for $x \lesssim 0.04$) due to the injection of holes are studied by means of ^{63}Cu NQR spin-lattice relaxation time T_1 measurements. The results are discussed in the framework of the connection between T_1 and the in-plane magnetic correlation length $\xi_{2D}(x,T)$. It is found that at high temperatures the system remains in the renormalized classical regime, with a spin stiffness constant $\rho_s(x)$ reduced by small doping to an extent larger than the one due to Zn doping. For $x\gtrsim 0.02$ the effect of doping on $\rho_s(x)$ appears to level off. The values for $\rho_s(x)$ derived from T_1 for $T\gtrsim 500$ K are much larger than the ones estimated from the temperature behavior of sublattice magnetization in the ordered phase ($T\leq T_N$). It is argued that these features are consistent with the hypothesis of formation of stripes of microsegregated holes.Comment: 10 pages, 3 figure

A closed form for the electrostatic interaction between two rod-like charged objects

We have calculated the electrostatic interaction between two rod-like charged objects with arbitrary orientations in three dimensions. we obtained a closed form formula expressing the interaction energy in terms of the separation distance between the centers of the two rod-like objects, $r$, their lengths (denoted by $2l_1$ and $2l_2$), and their relative orientations (indicated by $\theta$ and $\phi$). When the objects have the same length ($2l_1=2l_2=l$), for particular values of separations, i.e for $r\leq0.8 l$, two types of minimum are appeared in the interaction energy with respect to $\theta$. By employing the closed form formula and introducing a scaled temperature $t$, we have also studied the thermodynamic properties of a one dimensional system of rod-like charged objects. For different separation distances, the dependence of the specific heat of the system to the scaled temperature has been studied. It is found that for $r<0.8 l$, the specific heat has a maximum.Comment: 10 pages, 9 figures, 1 table, Accepted by J. Phys.: Condens. Matte

Imaging Venous Angiomas

Chapter A2.3 discusses non‐invasive cerebral venous imaging for those patients thought to have venous angiomas using Magnetic Resonance Venography (MRV) and MRI. Use of specific protocols is described.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/145264/1/cpmia0203.pd

Neutron spectroscopy measurements of 14 MeV neutrons at unprecedented energy resolution and implications for deuterium-tritium fusion plasma diagnostics

An accurate calibration of the JET neutron diagnostics with a 14 MeV neutron generator was performed in the first half of 2017 in order to provide a reliable measurement of the fusion power during the next JET deuterium–tritium (DT) campaign. In order to meet the target accuracy, the chosen neutron generator has been fully characterized at the Neutron Metrology Laboratory of the National Physical Laboratory (NPL), Teddington, United Kingdom. The present paper describes the measurements of the neutron energy spectra obtained using a highresolution single-crystal diamond detector (SCD). The measurements, together with a new neutron source routine ‘ad hoc’ developed for the MCNP code, allowed the complex features of the neutron energy spectra resulting from the mixed D/T beam ions interacting with the T/D target nuclei to be resolved for the first time. From the spectral analysis a quantitative estimation of the beam ion composition has been made. The unprecedented intrinsic energy resolution (<1% full width at half maximum (FWHM) at 14 MeV) of diamond detectors opens up new prospects for diagnosing DT plasmas, such as, for instance, the possibility to study non-classical slowing down of the beam ions by neutron spectroscopy on ITER.EURATOM 63305

Design and Experimental Characterization of a Niti-Based, High-Frequency, Centripetal Peristaltic Actuator

Development and experimental testing of a peristaltic device actuated by a single shape-memory NiTi wire are described. The actuator is designed to radially shrink a compliant silicone pipe, and must work on a sustained basis at an actuation frequency that is higher than those typical of NiTi actuators. Four rigid, aluminum-made circular sectors are sitting along the pipe circumference and provide the required NiTi wire housing. The aluminum assembly acts as geometrical amplifier of the wire contraction and as heat sink required to dissipate the thermal energy of the wire during the cooling phase. We present and discuss the full experimental investigation of the actuator performance, measured in terms of its ability to reduce the pipe diameter, at a sustained frequency of 1.5 Hz. Moreover, we investigate how the diameter contraction is affected by various design parameters as well as actuation frequencies up to 4 Hz. We manage to make the NiTi wire work at 3% in strain, cyclically providing the designed pipe wall displacement. The actuator performance is found to decay approximately linearly with actuation frequencies up to 4 Hz. Also, the interface between the wire and the aluminum parts is found to be essential in defining the functional performance of the actuator

Neutron spectroscopy measurements of 14 MeV neutrons at unprecedented energy resolution and implications for deuterium-tritium fusion plasma diagnostics

Peer reviewe